veereddy
07-13 04:32 PM
Congratulations, your long journey was inspirational to stay positive. Thank you!
wallpaper images lil wayne quotes from
anilsal
10-12 12:56 AM
My labor was filed on July 2004 and I have not received an approval yet.
I got an RFE last week stating that Employeer has to again prove the RIR status of the application.
So Lawyer has started the advertisement process again.
Every step in the GC process is traumatic. One step gives less trauma than the other. But there is no way anyone has got a GC without agony (unless you had an easy way out).
I got an RFE last week stating that Employeer has to again prove the RIR status of the application.
So Lawyer has started the advertisement process again.
Every step in the GC process is traumatic. One step gives less trauma than the other. But there is no way anyone has got a GC without agony (unless you had an easy way out).
smuggymba
05-12 10:09 AM
We as a community have not even done 5 % of the hard work that DREAM act advocates have done. So such provisions are well deserved by them for the hard work they have done. If we had done enough work for our provisions, there is no doubt our provisions would have seen the day. You need to do some search on all the DREAM act advocates have done in the last few years to reach where they are now. And then compare it our community effort and you will get the answers.
We recently had an advocacy day. How many of you contributed to it. We failed to even reach a modest budget goal for such a big event. So there is no point blaming undocumented. We need to first blame ourselves for doing nothing.
Only 200 ppl contributed and now 20 new memebers from July 2007 show up everyday in the prediction thread wanting to be current.
I believe there is a mini-advocacy in July - do we need to contribute for that. Any other details?
We recently had an advocacy day. How many of you contributed to it. We failed to even reach a modest budget goal for such a big event. So there is no point blaming undocumented. We need to first blame ourselves for doing nothing.
Only 200 ppl contributed and now 20 new memebers from July 2007 show up everyday in the prediction thread wanting to be current.
I believe there is a mini-advocacy in July - do we need to contribute for that. Any other details?
2011 LIL WAYNE QUOTES FROM SONGS
ragz4u
04-01 03:42 PM
Please call/email your friends too
more...
ken
10-01 12:43 AM
Hi Ebizash-
Did you noticed any LUD today on ure AP renewal case
Ken,
The reason that the USPS is not showing your documents delivered could be many. One of the biggest reasons that I have experienced is "unable to scan the bar code". This is more probable if you had printed the mailing label and affixed it on the envelope with a tape. Sometimes the tape can overlap the bar code making the bar code difficult to be scanned. I frequently use USPS priority mail and in about 10% of the cases this happens. But I never had a lost priority mail piece.
Additionally the fact that you had a soft LUD on 9/28, I would think that LUD was for the reason that USCIS received the documents. I had applied AP online on the same date as you did, sent docs via priority mail the next day. USPS showed that the documents delivered on 9/25 and had soft LUDs on 9/25 and 9/28.
Hope this helps!
Did you noticed any LUD today on ure AP renewal case
Ken,
The reason that the USPS is not showing your documents delivered could be many. One of the biggest reasons that I have experienced is "unable to scan the bar code". This is more probable if you had printed the mailing label and affixed it on the envelope with a tape. Sometimes the tape can overlap the bar code making the bar code difficult to be scanned. I frequently use USPS priority mail and in about 10% of the cases this happens. But I never had a lost priority mail piece.
Additionally the fact that you had a soft LUD on 9/28, I would think that LUD was for the reason that USCIS received the documents. I had applied AP online on the same date as you did, sent docs via priority mail the next day. USPS showed that the documents delivered on 9/25 and had soft LUDs on 9/25 and 9/28.
Hope this helps!
gcseeker2002
01-13 05:04 PM
Hey gcseeker2002, after 300+ postings also how can you post such a thing.
This is new rule implemented and by thinking you as senior if someone goes and faces problem will you be responsible. So please don't do this boss.
To All Who believe no need to have valid VISA while going back to India or their country.
This is email got from German Consulate at Washington DC to my collegue.
German Cosulate Rep at DC: You wrote that your visa for the United States already expired in September 2010. Therefore you do not fall under Exception Nr. 2. This exception is meant for persons travelling to the US holding a valid US-visa (e.g. a visitors visa with one entry) on their way travelling to the US (Exception 1) and travelling back to their home country during the validity dates of this same visa, but already having used it for entering the US (Exception2) . I hope this clarifies your additional question. I suggest that you apply for an Airport Transit Visa as soon as possible to avoid any problems when travelling back to India via Frankfurt airport.
vishwak, dont consider my seniority by number of posts. As is I am going through so much injustice in life, having spent 12 years in this country and still waiting for GC bcos of this stupid EB3 mess, and now the germans decide to harrass me by asking for transit visa ? Not that I dont want to follow rules, but after spending 12 years waiting for GC, I am glad that I broke atleast one rule, of travelling through frankfurt to and from india without the damned transit visa. Of course I was travelling alone, and my family was not travelling , and hence I could risk it out. This does in no way prevent anybody in this forum or the world from not getting transit visa and continue to be opressed by the germans. Folks, I have just told my experience, rest is upto you if you want to get the transit visa .
This is new rule implemented and by thinking you as senior if someone goes and faces problem will you be responsible. So please don't do this boss.
To All Who believe no need to have valid VISA while going back to India or their country.
This is email got from German Consulate at Washington DC to my collegue.
German Cosulate Rep at DC: You wrote that your visa for the United States already expired in September 2010. Therefore you do not fall under Exception Nr. 2. This exception is meant for persons travelling to the US holding a valid US-visa (e.g. a visitors visa with one entry) on their way travelling to the US (Exception 1) and travelling back to their home country during the validity dates of this same visa, but already having used it for entering the US (Exception2) . I hope this clarifies your additional question. I suggest that you apply for an Airport Transit Visa as soon as possible to avoid any problems when travelling back to India via Frankfurt airport.
vishwak, dont consider my seniority by number of posts. As is I am going through so much injustice in life, having spent 12 years in this country and still waiting for GC bcos of this stupid EB3 mess, and now the germans decide to harrass me by asking for transit visa ? Not that I dont want to follow rules, but after spending 12 years waiting for GC, I am glad that I broke atleast one rule, of travelling through frankfurt to and from india without the damned transit visa. Of course I was travelling alone, and my family was not travelling , and hence I could risk it out. This does in no way prevent anybody in this forum or the world from not getting transit visa and continue to be opressed by the germans. Folks, I have just told my experience, rest is upto you if you want to get the transit visa .
more...
makemygc
07-27 01:43 PM
Urgency of getting a receipt is that once you get the receipt, it means that USCIS has 'accepted' your application and it will not be rejected for lack of initial evidence.
You can track it by checking your bank account too. You checks will be cashed first before you get the receipt.
You can track it by checking your bank account too. You checks will be cashed first before you get the receipt.
2010 lil wayne quotes from songs. lil wayne quotes about girls
little_willy
09-19 04:29 PM
So those guys who attended the hearings or met with senators. what was the result? what did they accomplished? did they get the opportunity to participate with the senator or law maker in an action plan? or we just wasted that opportunity asking for autographs? please those guys post your comments.
So, with this posting I assume that you neither attended the rally nor put in any effort towards it cause. I sincerely wish I am wrong. Don't be so dumb and also claim that you are high skilled, they don't go together. Yes, we did get our autographs and we have the right to flaunt for what we did at DC. You have the right to post what you wish but don't ever again ridicule the people who put in the efforts.
So, with this posting I assume that you neither attended the rally nor put in any effort towards it cause. I sincerely wish I am wrong. Don't be so dumb and also claim that you are high skilled, they don't go together. Yes, we did get our autographs and we have the right to flaunt for what we did at DC. You have the right to post what you wish but don't ever again ridicule the people who put in the efforts.
more...
lonedesi
04-01 05:36 PM
Just sent Fax #11 too
hair lil wayne quotes about haters
qvadis
12-29 04:03 PM
No one analysed the statue of the language used in 202 5 a.
If the total number of visas available under paragraph (1), (2), (3), (4), or (5).
You might have to define what the word "is" is ;-)
Anyway, that paragraph also states: "If the total number of visas available under paragraph (1), (2), (3), (4), or (5) [...] exceeds the number of qualified immigrants who may otherwise issued such visas,." but then continues on with: "the visas made available under that paragraph shall be issued without regard to the numerical limitation"
One could interpret this distinction such that the actual number of visas available is not necessarily the same number of visas made available, which is fixed to 28.6% + spill-over. It might, as well, comprise only those unused visas that haven't been passed down to a lower category. 203 (b) (2) / (3) and 202(5) seem to compete over the unused numbers. Not sure which one has preference.
This is the very direct, simple interpretation of 202 5 A.
Therefore one cannot (EB3-ROW) interpret, for their convenience.
Well, that's according to your interpretation. You seem to suggest that USCIS disagrees with your interpretation. We probably have to wait for the next immigration statistics to see what rule USCIS has been following.
Thats why I suggest the IV to discuss with experinced attorney and make a enquiry with law makers or DOS, if required. Otherwise (if it is wrong it is a big blow to India and China). We will get only 2800 per year.
I'd hope IV would focus on increasing the number of GCs available to all of us, instead of fighting for allocation. ACT-21 increased the number of H1B visas without increasing the number of GCs.
If the total number of visas available under paragraph (1), (2), (3), (4), or (5).
You might have to define what the word "is" is ;-)
Anyway, that paragraph also states: "If the total number of visas available under paragraph (1), (2), (3), (4), or (5) [...] exceeds the number of qualified immigrants who may otherwise issued such visas,." but then continues on with: "the visas made available under that paragraph shall be issued without regard to the numerical limitation"
One could interpret this distinction such that the actual number of visas available is not necessarily the same number of visas made available, which is fixed to 28.6% + spill-over. It might, as well, comprise only those unused visas that haven't been passed down to a lower category. 203 (b) (2) / (3) and 202(5) seem to compete over the unused numbers. Not sure which one has preference.
This is the very direct, simple interpretation of 202 5 A.
Therefore one cannot (EB3-ROW) interpret, for their convenience.
Well, that's according to your interpretation. You seem to suggest that USCIS disagrees with your interpretation. We probably have to wait for the next immigration statistics to see what rule USCIS has been following.
Thats why I suggest the IV to discuss with experinced attorney and make a enquiry with law makers or DOS, if required. Otherwise (if it is wrong it is a big blow to India and China). We will get only 2800 per year.
I'd hope IV would focus on increasing the number of GCs available to all of us, instead of fighting for allocation. ACT-21 increased the number of H1B visas without increasing the number of GCs.
more...
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
hot lil wayne quotes from songs. Lil Wayne Quotes; Lil Wayne Quotes. spazzcat
Lasantha
08-22 10:43 AM
Why not GC_sufferer do it for us
I don't think he can.
I don't think he can.
more...
house lil wayne quotes from songs
sbabunle
03-18 11:28 AM
Lawsuite may not work in all occasions. If visa's are not available how can USCIS approve a petition? The law say a VISA should be available in order to approve a GC.
tattoo Lil Wayne Quotes
waitingnwaiting
11-10 07:58 AM
When is the December visa bulletin coming? Can someone ask their lawyer?
Why is nobody predicting? Are we all becoming so pessimistic?
Why is nobody predicting? Are we all becoming so pessimistic?
more...
pictures dresses lil wayne quotes on
vin13
06-24 05:12 PM
In the 2006 CIR was passed by Senate and it failed in Congress.
The strategy was adding poison pill. They deliberately added so many poison pill that
even EB folks were opposing the bill.
I respect your opinion. CIR failed in 2006. But if Democrats do bring the CIR up again and it fails again, it doesnot look good upon them either. So the hope is that they will check the feasibility of passing. And, we(EB folks) may have a chance to piggy back with the Undocumented and latino lobby.
The strategy was adding poison pill. They deliberately added so many poison pill that
even EB folks were opposing the bill.
I respect your opinion. CIR failed in 2006. But if Democrats do bring the CIR up again and it fails again, it doesnot look good upon them either. So the hope is that they will check the feasibility of passing. And, we(EB folks) may have a chance to piggy back with the Undocumented and latino lobby.
dresses lil wayne quotes from songs. wallpaper love quotes.
bobzibub
11-21 12:07 PM
http://www.change.gov/agenda/immigration_agenda/
more...
makeup Is. lil wayne quotes
.jpg "lil wayne quotes from songs")
sparky_jones
10-02 01:03 PM
I am not sure what a_to_z_Gc is looking for more details, but I would like to now if your case was transferred from NSC to CSC and back.
Those whose cases have transferred back to NSC have not received the FP notices. I would like to know if your case was transferred back to NSC.
My case was transferred from NSC to CSC, and then to TSC. I guess its because my I-140 was approved by TSC. I got my FP notices from TSC.
Those whose cases have transferred back to NSC have not received the FP notices. I would like to know if your case was transferred back to NSC.
My case was transferred from NSC to CSC, and then to TSC. I guess its because my I-140 was approved by TSC. I got my FP notices from TSC.
girlfriend Love Quotes Lil Wayne.
rdehar
07-17 10:38 AM
Sorry But please tell me how to do this?
In IE, goto: Tools > Internet Options > (Temp Internet files) Delete Files > Ok
Do same for "Delete Cookies" and then "Clear History"
In Firefox: Tools > Clear Private Data > Check all boxes > Ok
This should do it ...
In IE, goto: Tools > Internet Options > (Temp Internet files) Delete Files > Ok
Do same for "Delete Cookies" and then "Clear History"
In Firefox: Tools > Clear Private Data > Check all boxes > Ok
This should do it ...
hairstyles lil wayne quotes from songs.
chi_shark
05-18 04:21 PM
i think iits and iims are even better recognized... lets do a special quota for us fortunates too... ha ha ha...
kumar1
08-24 10:35 AM
Yes you may.
Gurus...
I am in a similar situation and have a very simple question. Can I port from EB3 to EB2, while on EAD? I do not have a valid H1. AFAIK porting needs re-filing a labor application, hence the confusion.
Thanks!
Gurus...
I am in a similar situation and have a very simple question. Can I port from EB3 to EB2, while on EAD? I do not have a valid H1. AFAIK porting needs re-filing a labor application, hence the confusion.
Thanks!
BharatPremi
07-17 03:47 AM
I hear what you are saying. I am just saying this is a band aid solution.
jasquil
Yes, but you are missing the one important fact, that "band aid solution" would put band aid to thousands of hurt people which will sooth them for a while. I understand, your 485 is already in pipeline so you already have those band aids but claiming to be sorry portrayed you very selfish. Think about teh group then you will slowly start forgeting your sorriness.
jasquil
Yes, but you are missing the one important fact, that "band aid solution" would put band aid to thousands of hurt people which will sooth them for a while. I understand, your 485 is already in pipeline so you already have those band aids but claiming to be sorry portrayed you very selfish. Think about teh group then you will slowly start forgeting your sorriness.
No comments:
Post a Comment